Satons
Home > Product center > Feedback reactor
Feedback reactor
Feedback reactorSTS-CKSG Serise
Product introduction
Feedback reactor with high temperature, high pressure level 200 polyamide argon amine enameled wire, dv/dt pulse impact the enameled wire can bear higher in the circuit..
Data download
One, product introduction
       Renewable energy generated Inverter Braking feedback to the power grid, and utilized, but the rectifying unit is IGBT, the harmonic current will produce more,and then to the pollution of power grid. So in the inverter is added in front of the feedback reactor and a filter to improve the quality of electric energy.
Two, performance specification

1 feedback reactor with high temperature, high pressure level 200 polyamide argon amine enameled wire, dv/dt pulse impact the enameled wire can bear higher in the circuit;;

2 feedback reactor using imported materials, the iron loss is low, high frequency,strong overload capacity, the magnetostrictive coefficient is zero;

3 feedback reactor with no air gap structure, not only has the advantages of simple structure, beautiful appearance, and the magnetic flux leakage of small,long time no change in inductance and reliable.
Three. Technical parameters
 

Working voltage: 3*220 ~ 1140 (VAC)

Rated current: 5 ~ 2000 (A)

Use scope: Adapter Converter Power 2.2 ~ 1200 (KW)

Motor frequency: 50HZ

The switching frequency: 1.5 ~ 16 (KHZ)

The pressure drop (UK):<12% (rated voltage, 50HZ and constant current)

The harmonic voltage: THD<5%

Operating and storage: -40 ~ +85 (c)

Insulation grade: H

Shell protection grade: IPOO/IP23

Humidity: 0 ~ 98 (%), no condensation

Height: <2000M

Design standards: EN61558-2-20 (VDE0570-2-20), GB14549-93
Share to your:

Blog roll

All rights reserved: Satons (Shanghai) power supply co., LTD. | Tel:+86-21-6461 9085/6461 9086 | Web site:www.sadunsi.com | 沪ICP备09099323号-2
Technical support:萨顿斯(上海)电源有限公司 点击这里给我发送消息